Leica Geosystems - Incident Mapping Suite


 
RSS Feed
News
Dec
29
Posted by James Johnston on 29 December 2016 09:49 AM

Leica Geosystems Incident Mapping Suite Map360 Core and PointCloud Extension Course Training Standard

Leica Geosystems will be hosting a 4 or 5 day Certified Training Session for new and experienced Map360 users.   A 32 hour class will introduce users to IMS Map360 CAD functions.  Graduates of the 32 hour class can stay for the fifth day to learn about Pointclouds.

Graduates of the program will be awarded the Designation(s):

  • (32 hour) IMS Map360 Certified Professional – Map360 Fundamentals
  • (40 hour) IMS Map360 Certified Professional – Map360 Fundamentals + PointCloud

This will be an ACTAR Certified Curriculum elligible for up to 40 Continuing Education Credits. 

See below for a summary of the Syllabus:

 IMS Map360 Fundamentals: 

   
Topic  ACTAR Certified Class Hours  Description 
 Introduction to Map360  1.0  Opening the program and using the Project Manager
 Map360 User Interface  1.0  Learn about the IMS Map360 workspace and navigating the critical elements of your scene
 Introduction to CAD Drawing  8.0

 Understand and practise coordinate systems, CAD drawing and modifying commands with

this AutoCAD compatible drawing program.

 Baseline Offset  2.0  An introduction to importing data created using the traditional "Baseline Offset" mapping technique.
 AutoMap (and import ASCII)  1.5  An introduction to points importing and customizing drawing appearance
 Data Collector Import Topics, which can include:
•Import LTI QuickMap
•Importing a Leica Viva or Captivate Project
•Evidence Recorder Import
 3.5

 A thorough introduction to the topic of data collector imports, using samples from a variety of sensors. 

Content of this section can vary depending on the needs of the class.

 Vehicle Database  2.0  Import vehicles and specifications from the Vehicle Database
 Symbol Librarian  3.0  Use and customize the appearance of Map360's extensive Symbols Library.
 Scene Analysis  1.5  An introduction to the scene mapping tools included in the Scene Analysis module
 Dimensioning and Annotation  1.5  Augment and Annotate your drawing using predefined labeling and precision dimensioning tools
 Inserting Images  2.0  Insert aerial imagery and terrestrial imagery for display or easy access within your forensic map
 Layouts and Printing  2.5

 Use AutoCAD compatible drawing layouts to complete your diagram.  Class will be taught to customize

the appearance of existing templates and to create their own for a consistant, professional final result.

  Final Exam  2.0  Complete a written exam and a practical drawing exercise to prove your competancy
  Course Critique   0.5  Complete a short survey for instructor feedback
 Total:  32.0   
 

IMS Map360 Pointcloud:

   
 Topic    ACTAR Certified Class Hours    Description  
 Importing a LAS file into Cyclone  1.0  Import a Pointcloud from a UAV or "Non-Leica" source
 Opening a Cyclone Database  0.5  Import a Pointcloud that has been processed using Leica Cyclone
 Clipping and Slicing  1.5  Use Map360 tools to disect a pointcloud to prepare it for drafting
 CAD in the PointCloud    2.0  2D and 3D drafting in the point cloud
 Witness Viewpoint  1.0  Recreate a viewpoint from anywhere inside your pointcloud
 Bullet Path Reconstruction  1.0   Create a trajectory cone from scanned trajectory rods to recreate a bullet path
 QA Protocol Exercise  1.0  Create a QA report to establish the accuracy of your scanning data
Total: 8.0  

 

Prerequisites:

IMS Map360 Fundamentals:

This is an introductory class, which will prepare experienced investigators to use CAD software in general and IMS Map360 in particular.  Please review the points below to ensure that you are well prepared for this class:

  1. You must bring your own laptop, power supply and mouse to the class.
  2. Your IMS software must be installed and registered on the laptop before the class begins so that the instructor can focus on the class material.  Please contact IMS support via the "Contact Us" link above for any assistance with this matter well in advance of your class.
  3. It is highly recomended that attendees complete this short online tutorial before class, to familiarize themselves with basic CAD functions and the IMS Map360 workspace:

IMS Map360 Point Cloud:

Attendees must complete IMS Map360 Fundamentals.  Please review the points below to ensure that you are well prepared for this class:

  1. You must bring your own laptop, power supply and mouse to the class.
  2. Your IMS software and Leica Cyclone Software must be installed and registered on the laptop before the class begins so that the instructor can focus on the class material.  Please contact IMS support via the "Contact Us" link above for any assistance with this matter well in advance of your class.
  3. It is highly recomended that attendees complete this short online tutorial before class, to familiarize themselves with pointclouds and to ensure all necessary components are working correctly on your system:

 

Number of Seats Available: 12 of 16

Instructor: TBA

Dates and Times (Central Mountain Times shown):  Monday to Thursday November 6 to November 9 (Core IMS Topics) + Friday, November 10 (PointCloud Topics)

Location: Laser Technologies Boardroom in Denver, Colorado

Pick here for Location

Tuition for FundamentalsUS$1000

Tuition for Fundamentals plus Pointcloud: US$1350 for the

To Register: Please call 1-888-632-8285 or 1-800-668-3312

Questions? Please call 1-800-668-3312 or 250-707-0000


Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments: